home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
New Voices New Visions 1994
/
New Voices New Visions 1994 - Disc 1.iso
/
Resources
/
Anecdoted Archive
/
Anecdoted Archive Resources
/
introduction
/
introduction.rsrc
/
STR#_1949.txt
< prev
next >
Wrap
Text File
|
1995-05-31
|
2KB
|
127 lines
Driver control error.
Driver status error.
Video source out of Range.
Zoom factor not 1,2,4, or 8.
Pan position out of range.
Hue not in range.
Saturation not in range.
Brightness not in range.
Contrast not in range.
White level not in range.
Black level not in range.
Source video rectangle out of
range.
Horizontal size not in range.
Vertical size not in range.
Vertical size must be even.
Source video top and bottom positions must be even.
Control flag not in range.
Screen position not in frame
buffer.
Top position must be even.
NuBus delay not in range.
Timed out with WaitTillDone.
Board cannot do live video at this bit depth.
Byte offset not in range.
Board already reserved.
Color table handle too small or NIL.
Nil Handle.
Not multiple of Four.
Input type not valid.
Board not available.
DMSD register or data out of range.
Load digitze LUT pointer NIL.
AGC response out of range.
LUMA delay compensation out of
range.
Vertical noise reduction mode out of range.
Bandpass type out of range.
Coring out of range.
Aperture out of range.
Color key mask rectangle out of
range.
Color value out of range.
DMSD register out of range.
Get digitize LUT pointer NIL.
VideoTime Mask has not been created.
The RasterOps VideoTime board needs to be initialized with the VideoTimeΓäó Configure program.
No HyperCard document window found.
Not a RasterOps video function.
Bad recording rectangle.
No such video source.
Out of memory.
32-bit QuickDraw is not installed.
Recording depth not 0,1,2,4,8,16, or 32.
Rectangle not on RasterOps screen.
Failed recording PICT to Clipboard.
Cancelled by user.
Requested 'clut' resource not found.
Cannot do live video in this bit depth.
No video driver loaded.
Board order parameter not in range (1-6).
Not a RasterOps real-time video board.
XCMD has wrong number of parameters.
The requested RasterOps board is not present.
RasterOps video error code =